必威APP下载-必威体育官网入口-网址

Customized high speed dispensing machine, glue machine!

必威APP下载  

Dongguan CNAUTO Automation Co., LTD.

13928403389

What are the standards for dispensing sensors?

编辑:点胶机厂家   日期:2020-03-10 09:25   浏览:

Due to the communication progress of electronic computer and information technology, the consumption of sensors increases rapidly, which becomes more critical in electronic products such as mobile phones. Most of the distance sensors used in electronic products such as mobile phones are based on dispensing. As we all know, the standard of sensor dispensing is affected by the actual needs, so dispensing is to better solve the problem of sensors Clutter, to solve the impact, to prevent sensor errors, to achieve a precise degree, dispensing machine and other corresponding production equipment characteristics to be fully improved, can meet the market trend.
 
 传感器点胶
Sensor dispensing
 
The dispensing standard of the sensor is relatively high. What kind of standard should be achieved in the use process? What kind of problems will also occur? Next, let's learn some of the technical personnel's summary!
 
Dispensing standard
 
① Don't glue too much, too little, too much
 
Don't spray off.
 
3. Do not splash glue.
 
Fourth, do not lack glue.
 
 桌面式全自动点胶机
⑤ Same width and thickness
 
Desktop type automatic dispensing machine
 
Problems encountered in dispensing
 
1. Polygum
 
Description:
 
1. It is not adjusted to single point ejection.
 
2. Too many flight dispensing points.
 
3. The nozzle specification is very large.
 
 双工位台式自动点胶机
4. The valve opening time is too long.
 
Two. Less glue.
 
Description:
 
1. It is not adjusted to single point ejection.
 
2. Too many flight dispensing points.
 
3. The specification of the nozzle is very large.
 
4. The valve opening time is too long.
 
Three. Splash glue
 
Description:
 
1. The stroke of the striker is very large.
 
2. The spraying degree is too high.
 
Four. Lack of glue.
 
Description:
 
1. Marking efficiency is too fast,
 
2, hang glue.
 
5、 Too much glue
 
Description:
 
1. The fixture level in the central area is not adjusted correctly, which leads to poor sensor fixation.
 
2. The program was not compiled well, which caused the glue spraying to be crooked.
 
3. The nozzle is not clean, and glue is hung
 
Double station automatic dispensing machine
 
Considering the influence of many factors, the requirements of the sensor dispensing standard are relatively high. It is recommended to try to adjust the sample of semi-finished products before operation, for example, it will be better to confirm the parameters or the whole set is complete and correct before putting into actual production.


中制自动化设备有限企业全力为用户打造各种实用性强的高速全自动点胶机 大型高速点胶机 落地式高速点胶机

必威APP下载|必威体育官网入口

XML 地图 | Sitemap 地图